M52348SP Просмотр технического описания (PDF) - MITSUBISHI ELECTRIC

Номер в каталоге

Компоненты Описание

производитель

M52348SP

WIDE FREQUENCY BAND ANALOG SWITCH

MITSUBISHI ELECTRIC  

MITSUBISHI ICs (Monitor)

M52348SP

WIDE FREQUENCY BAND ANALOG SWITCH

Vsth1 Switching threshold voltage 1

Vsth2 Switching threshold voltage 2

1. The conditions shall be as provided in the Electrical

Characteristics Table. Input SG7 into pins 2 , 4 and 6 . Input

SG7 into pins 7 and 8 . Do not input signal into other pins.

2. Apply a voltage of 0V to pin 17 and check each of TP19, TP20,

TP23, TP25, TP28 and TP31 for output of signal.

3. Gradually increasing the voltage at pin 17 , specify the output at

pin 17 to be Vsth1 when the signal is not output from the above

pins.

4. As in the same manner, input SG1 into pins 10 , 12 and 14 and

input SG7 into pins 15 and 16 . Do not input signal into other

pins.

5. Apply a voltage of 5V to pin 17 and check each of TP19, TP20,

TP23, TP25, TP28 and TP31 for output of signal.

6. Gradually decreasing the voltage at pin 17 , specify the output at

pin 17 to be Vsth2 when the signal is not output from the above

pins.

TYPICAL CHARACTERISTICS

THERMAL DERATING (MAXIMUM RATING)

2000

1603

1600

1200

800

400

-20 0

25 50 75 85 100 125 150

AMBIENT TEMPERATURE Ta (˚C)

INPUT SIGNAL

SG No.

signals

Sine wave (f=60 kHz, 0.7VP-P, amplitude variable)

SG1

0.7VP-P

(Amplitude variable)

SG2

SG3

SG4

SG5

Sine wave (f=1 MHz, amplitude 0.7VP-P)

Sine wave (f=10 MHz, amplitude 0.7VP-P)

Sine wave (f=100 MHz, amplitude 0.7VP-P)

Sine wave (f=250 MHz, amplitude 0.7VP-P)

Pulse of 0.7VP-P in amplitude

(f=60kHz, duty 80%)

SG6

0.7VP-P

Square wave

(Amplitude 5.0 VO-P TTL, f=60 kHz, duty = 50%)

SG7

5V

0V

6

Share Link: