Philips Semiconductors
Ultra low-voltage stereo filter DAC
Preliminary specification
UDA1324TS
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134).
SYMBOL
PARAMETER
VDDD
VDDA
Txtal(max)
Tstg
Tamb
Ves
digital supply voltage
analog supply voltage
maximum crystal temperature
storage temperature
ambient temperature
electrostatic handling voltage
Isc(DAC) short-circuit current of DAC
note 1
note 1
CONDITIONS
note 2
note 3
note 4
output short-circuited to VSSA(DAC)
output short-circuited to VDDA(DAC)
MIN.
−
−
−
−65
−40
−3 000
−300
MAX.
5.0
5.0
150
+125
+85
+3 000
+300
UNIT
V
V
°C
°C
°C
V
V
−
450
mA
−
300
mA
Notes
1. All supply connections must be made to the same power supply.
2. Equivalent to discharging a 100 pF capacitor via a 1.5 kΩ series resistor, except pin 14 which can withstand ESD
pulses of −2500 to +2500 V.
3. Equivalent to discharging a 200 pF capacitor via a 2.5 µH series inductor.
4. Short-circuit test at Tamb = 0 °C and VDDA = 3 V. DAC operation after short-circuiting cannot be warranted.
HANDLING
Inputs and outputs are protected against electrostatic discharge in normal handling. However, to be totally safe, it is
desirable to take normal precautions appropriate to handling MOS devices.
THERMAL CHARACTERISTICS
SYMBOL
Rth(j-a)
PARAMETER
thermal resistance from junction to ambient
CONDITIONS
in free air
VALUE
190
UNIT
K/W
QUALITY SPECIFICATION
In accordance with “SNW-FQ-611-E”.
DC CHARACTERISTICS
VDDD = VDDA = 2.0 V; Tamb = 25 °C; RL = 5 kΩ; all voltages referenced to ground (pins VSSA and VSSD); unless
otherwise specified.
SYMBOL
PARAMETER
CONDITIONS
MIN.
TYP.
MAX. UNIT
Supplies
VDDA
VDDD
IDDA
IDDD
analog supply voltage
digital supply voltage
analog supply current
digital supply current
note 1
note 1
operating
operating
1.9
2.0
2.7
V
1.9
2.0
2.7
V
−
3.0
−
mA
−
1.5
−
mA
2000 Jan 20
11