NTE56030 Просмотр технического описания (PDF) - NTE Electronics

Номер в каталоге

Компоненты Описание

производитель

NTE56030

TRIAC, 40 Amp Isolated Tab

NTE Electronics 

NTE56030 & NTE56031

TRIAC, 40 Amp

Isolated Tab

Description:

The NTE56030 and NTE56031 are 40 Amp TRIACs in a TO218 type package with an isolated tab

designed to be driven directly with IC and MOS devices.

Absolute Maximum Ratings:

Peak Repetitive Off–State Voltage (Gate Open, TJ = +110°C, Note 1), VDRM

NTE56030 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400V

NTE56031 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600V

RMS On–State Current (TC = +80°C, 360° Conduction Angle), IT(RMS) . . . . . . . . . . . . . . . . . . . 40A

Peak Non–Repetitive Surge Current (One Cycle, at 50Hz or 60Hz), ITSM . . . . . . . . . . . . . . . . . 400A

Peak Gate–Trigger Current (t = 3µs), IGTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4A

Peak Gate–Power Dissipation (IGT ≤ IGTM), PGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40W

Average Gate–Power Dissipation, PG(AV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800mW

Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +110°C

Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +150°C

Typical Thermal Resistance, Junction–to–Case, RthJC(DC) . . . . . . . . . . . . . . . . . . . . . . . . . . 0.95°C/W

Note 1. All values apply in either direction.

Electrical Characteristics: (TC = +25°C unless otherwise specified)

Parameter

Symbol

Test Conditions

Peak Off–State Current

IDRM TJ = +110°C, VD = VDRM, Gate Open, Note

1

Gate Trigger Current

Quadrant I, II, III

Quadrant IV

IGT VD = 12V, RL = 30Ω

T2 (+) G (+), T2 (–) G (–) Quads I and III

T2 (+) G (–), T2 (–) G (+) Quads II and IV

Gate Trigger Voltage

Gate Non–Trigger Voltage

VGT VD = 12V, RL = 30Ω

VGD VD = VDRM, TJ = +110°C, RL = 3k,

Pulse Duration > 20µs, Note 1

Holding Current

IH Gate Open, Note 1

Peak On–State Voltage

VTM IT = 40A, Note 1

Note 1. All values apply in either direction.

Min Typ Max Unit

– – 0.5 mA

– – 100 mA

– – 150 mA

– – 2.5 V

0.2 – – V

– – 100 mA

– – 1.8 V

Share Link: