W91410 Просмотр технического описания (PDF) - Winbond

Номер в каталоге

Компоненты Описание

производитель

W91410

TONE/PULSE DIALER WITH SAVE FUNCTION

Winbond 

W91410 SERIES

Normal Dialing

OFF HOOK , D1 , D2 , …, Dn

1. D1, D2, ..., Dn will be dialed out.

2. Dialing length is unlimited, but redial is inhibited if length oversteps 32 digits.

Redialing

OFF HOOK , D1 , D2 , …, Dn BUSY, COME ON HOOK , OFF HOOK , R/P

The R/P key can execute the redial function only as the first key-in after off-hook; otherwise, it

will execute the pause function.

Access Pause

OFF HOOK , D1 , D2 , R/P , D3 , …, Dn

1. The pause function can be stored in memory.

2. The pause function is executed in normal dialing or memory dialing.

3. The pause function timing diagram is shown in Figure 3.

Pulse-to-tone (P→T)

OFF HOOK , D1 , D2 , …, Dn , P→T , D1' , D2' , …, Dn'

1. If the mode switch is set to pulse mode, then the output signal will be:

D1, D2, ..., Dn, Pause, D1', D2', ..., Dn'

(Pulse)

(Tone)

2. If the mode switch is set to tone mode, then the output signal will be:

D1, D2, ..., Dn, P→T D1, D2, ..., Dn,

(Tone)

(Pause) (Tone)

3. The dialer remains in tone mode when the digits have been dialed out and can be reset to pulse

mode only by going on-hook.

4. The P→T function timing diagram is shown in Figure 4.

Publication Release Date: January 1995

-5-

Revision A3

Share Link: