HI5960IBZ Просмотр технического описания (PDF) - Intersil
Номер в каталоге
Компоненты Описание
производитель
HI5960IBZ Datasheet PDF : 12 Pages
| |||
HI5960
Electrical Specifications AVDD = DVDD = +5V, VREF = Internal 1.2V, IOUTFS = 20mA, TA = 25oC for All Typical Values (Continued)
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNITS
POWER SUPPLY CHARACTERISTICS
AVDD Power Supply
DVDD Power Supply
Analog Supply Current (IAVDD)
(Notes 9)
(Notes 9)
5V or 3V, IOUTFS = 20mA
5V or 3V, IOUTFS = 2mA
2.7
5.0
5.5
V
2.7
5.0
5.5
V
-
23
-
mA
-
5
-
mA
Digital Supply Current (IDVDD)
5V (Note 5)
5V (Note 6)
-
7
-
mA
-
13
-
mA
5V (Note 7)
-
10
-
mA
3V (Note 5)
-
2
-
mA
3V (Note 6)
-
6
-
mA
3V (Note 7)
-
5
-
mA
Supply Current (IAVDD) Sleep Mode
Power Dissipation
5V or 3V, IOUTFS = Don’t Care
5V, IOUTFS = 20mA (Note 5)
-
2.7
-
mA
-
150
-
mW
5V, IOUTFS = 20mA (Note 6)
-
180 200
mW
5V, IOUTFS = 20mA (Note 7)
-
165
-
mW
5V, IOUTFS = 2mA (Note 6)
-
80
-
mW
3V, IOUTFS = 20mA (Note 5)
-
75
-
mW
3V, IOUTFS = 20mA (Note 6)
-
87
100
mW
3V, IOUTFS = 20mA (Note 7)
-
84
-
mW
3V, IOUTFS = 2mA (Note 6)
-
32
-
mW
Power Supply Rejection
Single Supply (Note 8)
-0.2
-
+0.2 % FSR/V
NOTES:
2. Gain Error measured as the error in the ratio between the full scale output current and the current through RSET (typically 625µA). Ideally the
ratio should be 32.
3. Parameter guaranteed by design or characterization and not production tested.
4. Spectral measurements made with differential transformer coupled output and no external filtering.
5. Measured with the clock at 50MSPS and the output frequency at 10MHz.
6. Measured with the clock at 100MSPS and the output frequency at 40MHz.
7. Measured with the clock at 130MSPS and the output frequency at 10MHz.
8. See “Definition of Specifications”.
9. It is recommended that the output current be reduced to 12mA or less to maintain optimum performance for operation below 3V. DVDD and AVDD
do not have to be equal.
7
Share Link: 