OPI211 Просмотр технического описания (PDF) - Optek Technology
Номер в каталоге
Компоненты Описание
производитель
OPI211 Datasheet PDF : 3 Pages
| |||
Surface Mount Optically Coupled Isolator
OPI210, OPI211
Features:
• 1kV electrical isolation
• Miniature package ideal for surface mount applications
• TTL, DTL compatible
• High DC Current Transfer ratio
Description:
Each Optically coupled isolator in this data sheet contains an infrared Light Emitting Diode (LED) and a NPN
silicon Photosensor. The OPI210 and OPI211 devices have 890 nm Light Emitting Diode (LED) and NPN
phototransistor and coupled on an FR-4 substrate. The devices are made with a sealed internal optically
transmissive path between the LED and the photosensor.
The OPI210 and OPI211 are identical except for the DC current transfer ratio. Both were designed with high
reliability in mind and are ideally suited for use in MIL-STD-883 applications. The devices may be mounted using
either silver or gold filled epoxies. The top of the device is covered with a silicone material and is very sensitive to
acetone type cleaning material.
This series is designed for transmission of information between one power supply voltage to another where the
potentials during surge conditions are not greater than the guaranteed isolation voltage.
Contact your local representative or OPTEK for more information.
Applications:
• Military equipment
• High-Reliability environments
• High voltage isolation between
input and output
• Electrical isolation in dirty
environments
• Industrial equipment
• Medical equipment
• Office equipment
OPI210, OPI211
1
3
Part
Number
LED
Peak
Wavelength
OPI210
OPI211
890 nm
Ordering Information
Sensor
Isolation
Voltage
(,000)
CTR
Typical
200
Transistor
1
350
IF (mA)
Typ / Max
VCE
(Volts)
Max
10 / 50
35
0.090 [2.29]
Collector (4)
Emitter (3)
0.004 [0.10]
8 Places
0.090 [2.29]
Cathode (2)
2
4
White Dot
Anode (1)
0.070 [1.78]
Anode (1)
0.025 [0.64]
Square 4 Places
Pin #
1
2
LED
Anode
Cathode
Pin #
4
3
Transistor
Collector
Emitter
DIMENSIONS ARE IN:
[MILLIMETERS]
INCHES
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 07/07
Page 1 of 3
Share Link: 