ACT4460 Просмотр технического описания (PDF) - Aeroflex Corporation
Номер в каталоге
Компоненты Описание
производитель
ACT4460 Datasheet PDF : 8 Pages
| |||
ACT 4454 / 4460 Single Supply Transceivers
for MIL-STD-1553A/B &
MacAir A3818, A4905, A5232 & A5690
Features
• Single 5 Volt Supply Operation
• Low Power Dissipation
• Small Size & Light Weight
• Dual Transceivers Save Space & Cost
• Outstanding MIL-STD-1553A/B and MacAir A3818, A4905,
A5232, A5690 Performance
• Processed and Screened to Mil-STD-883 Specs
• Radiation Hard Dielectric Isolation Monolithic Construction
for Severe Space Environments
• Superior High Frequency Line Transient and Input Ripple
Rejection
• Input and Output TTL Compatible Design
• DESC SMD# 5962-92061
Case Style
ACT 4454FP
Actual Size
TX DATA IN
TX DATA IN
TX INHIBIT
+5 V
+5V RTN
RX DATA IN
RX DATA IN
STROBE
DRIVER
INPUT
AMPLIFIER
ACTIVE
FILTER
REFERENCE
ACTIVE
FILTER
OUTPUT
STAG E
TX DATA OUT
TX DATA OUT
CO MP.
RX DATA OUT
CO MP.
RX DATA OUT
Block Diagram (without Transformer)
CIRCUIT TECHNOLOGY
www.aeroflex.com
General Description
The Aeroflex Circuit Technology
ACT4454 / 4460 series are next
generation monolithic transceiver
designs which provides full
compliance with MIL-STD-1553A/B
and MacAir A3818, A5690, A5232 &
A4905 requirements in the smallest
packages with low power
consumption and single power supply
operation.
The ACT4454 / 4460 series
performs the front-end analog
function of inputting and outputting
data through a transformer to the
MIL-STD-1553 data bus.
The ACT4454 / 4460 series can be
considered a "Universal" Transceiver
in that it is compatible with
MIL-STD-1553A & B, Macair A-3818,
A-4905, A-5232 and A-5690.
Design of these transceivers
reflects particular attention to active
filter performance. This results in low
bit and word error rate with superior
waveform purity and minimal zero
crossover distortion. Efficient
transmitter electrical and thermal
design provides low internal power
dissipation and heat rise at high as
well as low duty cycles.
Each channel of the dual
transceiver is completely separate
from the other and fully independent.
This includes power leads as well as
signal lines. Hence, each channel
may be connected to a different data
bus with no interaction.
Transmitter:
The Transmitter section accepts
bi-phase TTL data at the input and
eroflex Circuit Technology – Data Bus Modules For The Future © SCD4454 REV A 3/17/99
Share Link: 