DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MAX4573EWI Просмотр технического описания (PDF) - Maxim Integrated

Номер в каталоге
Компоненты Описание
производитель
MAX4573EWI Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Serially Controlled, Clickless
Audio/Video Switches
ABSOLUTE MAXIMUM RATINGS
V+ to GND ................................................................-0.3V to +6V
NO_ _, COM_, DOUT to GND (Note 1) ........-0.3V to (V+ + 0.3V)
SCL, SDA, CS, SCLK, DIN, A0, A1 to GND..............-0.3V to +6V
Continuous Current into Any Terminal..............................±10mA
Peak Current (pulsed at 1ms, 10% duty cycle)................±50mA
Continuous Power Dissipation (TA = +70°C)
QSOP (derate 10.8mW/°C above +70°C) ...................860mW
SSOP (derate 9.5mW/°C above +70°C) .....................762mW
Wide SO (derate 12.5mW/°C above +70°C).............1000mW
Operating Temperature Ranges
MAX457_C_ _ ....................................................0°C to +70°C
MAX457_E_ _..................................................-40°C to +85°C
Storage Temperature Range .............................-65°C to +160°C
Lead Temperature (soldering, 10sec) .............................+300°C
Note 1: Signals on NO_ _ or COM_ exceeding V+ or V- are clamped by internal diodes. Limit forward-diode current to maximum
current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Single +5V Supply
(V+ = +5V ±5%, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 2)
PARAMETER
ANALOG SWITCHES
Analog Signal Range (Note 3)
On-Resistance
SYMBOL
VNO_ _,
VCOM_
RON
CONDITIONS
ICOM_ = 4mA,
VNO_ _ = 3V,
V+ = 4.75V
TA = +25°C
TA = TMIN to TMAX
MIN TYP
0
25
On-Resistance Match
Between Channels (Note 4)
RON
ICOM_ = 4mA,
VNO_ _ = 3V,
V+ = 4.75V
TA = +25°C
TA = TMIN to TMAX
0.8
On-Resistance
Flatness (Note 5)
RFLAT
ICOM_ = 4mA;
TA = +25°C
V+ = 4.75V;
VNO_ _ = 1V, 2V, 3V TA = TMIN to TMAX
2
NO_ _ Off-Leakage
Current (Note 6)
VNO_ _ = 4.5V, 1V;
INO_ _ (OFF) VCOM_ = 1V, 4.5V;
V+ = 5.25V
TA = +25°C
TA = TMIN to TMAX
-0.2 0.01
-10
COM_ Off-Leakage
Current (Note 6)
VNO_ _ = 4.5V, 1V;
ICOM_ (OFF) VCOM_ = 1V, 4.5V;
V+ = 5.25V
TA = +25°C
TA = TMIN to TMAX
-0.2 0.01
-10
COM _ On-Leakage
Current (Note 6)
ICOM_ (ON)
VCOM_ = 4.5V, 1V;
VNO_ _ = 4.5V, 1V, or
floating; V+ = 5.25V
TA = +25°C
TA = TMIN to TMAX
-0.2 0.01
-10
AUDIO PERFORMANCE
Total Harmonic Distortion
plus Noise
Off-Isolation (Note 7)
THD+N
VISO(A)
Channel-to-Channel Crosstalk VCT(A)
fIN = 1kHz, RL = 600, VNO_ _ = 1VRMS,
VNO_ _ = 2.5V
VNO_ _ = 1VRMS, fIN = 20kHz,
RL = 600, Figure 1
VNO_ _ = 1VRMS, fIN = 20kHz,
RS = 600, Figure 1
0.07
-90
-90
MAX UNITS
V+
V
35
45
3
3
6
6
0.2
nA
10
0.2
nA
10
0.2
nA
10
%
dB
dB
2 _______________________________________________________________________________________

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]