RP1-12V Просмотр технического описания (PDF) - Matsushita Electric Works
Номер в каталоге
Компоненты Описание
производитель
RP1-12V Datasheet PDF : 4 Pages
| |||
RP
9. High frequency switching test (1.2 GHz, 1 W)
Sample: RP1-6V; No. of samples: n = 6
Ambient temperature: 20°C 68°F
• Change of pick-up/drop-out voltage
• Change of contact resistance
12
120
Trans-
mission
T1
RP relay
T2
Dummy load (50Ω)
WD-2351
Transmission: RF Tranceiver
IC-1201 (ICOH)
T1
ON
OFF
T2
0.2s
0.2s
1.5s 1.5s
10
8
6
Pick-up voltage
Max.
4
Min.
2
Drop-out voltage
Max.
Min.
0
5
10
15
No. of operations, ×104
100
80
60
40
20
0
Max.
Min.
5
10
15
No. of operations, ×104
NOTES
1. Packing direction
Relays are packed in a tube with the ori-
entation stripe (PIN NO. 1) toward the
green stopper.
Orientation (indicates PIN No. 1) stripe
Stopper (green)
2. Automatic mounting
To maintain the internal function of the
relay, the chucking pressure should
not exceed the values below.
Chucking pressure* in the direction A:
4.9 N {500 gf} or less
Chucking pressure* in the direction B:
9.8 N {1 kgf} or less
Chucking pressure* in the direction C:
9.8 N {1 kgf} or less
Please chuck the portion.
Avoid chucking the center of the relay. In
addition, excessive chucking pressure to
the pinpoint of the relay should be avoid-
ed.
A (4) C
(5)
(6)
B
mm inch
• Direction A • Direction B • Direction C
654 3
.118
6
3
12
.236
123
*Value of chucking pressure is shown by the value of weight
pressed on the portion (4 mm .157 inch dia.).
3. Soldering
Preheat according to the following condi-
tions.
Temperature 100°C 212°F or less
Time
Within 1 minute
Soldering should be done at 250°C
482°F within 5 s.
For Cautions for Use, see Relay Technical Information (Page 48 to 76).
9/61/2000
All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.
Go To Online Catalog
Share Link: 