IS61SP12832-5B(1999) Просмотр технического описания (PDF) - Integrated Silicon Solution
Номер в каталоге
Компоненты Описание
производитель
IS61SP12832-5B Datasheet PDF : 14 Pages
| |||
IS61SP12832
128K x 32 SYNCHRONOUS
PIPELINED STATIC RAM
ISSI ®
ADVANCE INFORMATION
APRIL 1999
FEATURES
• Internal self-timed write cycle
• Individual Byte Write Control and Global Write
• Clock controlled, registered address, data and
control
• Pentium™ or linear burst sequence control
using MODE input
• Three chip enables for simple depth expansion
and address pipelining
• Common data inputs and data outputs
• JEDEC 100-Pin TQFP and
119-pin PBGA package
• Single +3.3V, +10%, –5% power supply
• Power-down snooze mode
DESCRIPTION
The ISSI IS61SP12832 is a high-speed, low-power synchro-
nous static RAM designed to provide a burstable, high-
performance, secondary cache for the Pentium™, 680X0™,
and PowerPC™ microprocessors. It is organized as 131,072
words by 32 bits, fabricated with ISSI's advanced CMOS
technology. The device integrates a 2-bit burst counter, high-
speed SRAM core, and high-drive capability outputs into a
single monolithic circuit. All synchronous inputs pass through
registers controlled by a positive-edge-triggered single clock
input.
Write cycles are internally self-timed and are initiated by the
rising edge of the clock input. Write cycles can be from one to
four bytes wide as controlled by the write control inputs.
Separate byte enables allow individual bytes to be written.
BW1 controls DQa, BW2 controls DQb, BW3 controls DQc,
BW4 controls DQd, conditioned by BWE being LOW. A LOW
on GW input would cause all bytes to be written.
Bursts can be initiated with either ADSP (Address Status
Processor) or ADSC (Address Status Cache Controller) input
pins. Subsequent burst addresses can be generated inter-
nally by the IS61SP12832 and controlled by the ADV (burst
address advance) input pin.
The mode pin is used to select the burst sequence order,
Linear burst is achieved when this pin is tied LOW. Interleave
burst is achieved when this pin is tied HIGH or left floating.
FAST ACCESS TIME
Symbol
tKQ
tKC
Parameter
Clock Access Time
Cycle Time
Frenquency
-166
3.5
6
166
-150
3.8
6.7
150
-133
4
7.5
133
-117
4
8.5
117
-5 Units
5
ns
10
ns
100 MHz
This document contains ADVANCE INFORMATION data. ISSI reserves the right to make changes to its products at any time without notice in order to improve design and supply the best possible
product. We assume no responsibility for any errors which may appear in this publication. © Copyright 1998, Integrated Silicon Solution, Inc.
Integrated Silicon Solution, Inc. — 1-800-379-4774
1
ADVANCE INFORMATION SR038-0D
04/16/99
Share Link: 