LP6836P70 Просмотр технического описания (PDF) - Filtronic PLC

Номер в каталоге

Компоненты Описание

производитель

LP6836P70

PACKAGED MEDIUM POWER PHEMT

Filtronic PLC 

LP6836P70

PACKAGED MEDIUM POWER PHEMT

• ABSOLUTE MAXIMUM RATINGS

Parameter

Drain-Source Voltage

Gate-Source Voltage

Drain-Source Current

Gate Current

RF Input Power

Channel Operating Temperature

Storage Temperature

Total Power Dissipation

Symbol

VDS

VGS

IDS

IG

PIN

TCH

TSTG

PTOT

Test Conditions

TAmbient = 22 ± 3 °C

TAmbient = 22 ± 3 °C

TAmbient = 22 ± 3 °C

TAmbient = 22 ± 3 °C

TAmbient = 22 ± 3 °C

TAmbient = 22 ± 3 °C

—

TAmbient = 22 ± 3 °C

Min Max Units

7

V

-4

V

IDSS

mA

18

mA

150

mW

175

ºC

-65

175

ºC

1.0

W

Notes:

•

•

•

•

Operating conditions that exceed the Absolute Maximum Ratings could result in permanent damage to the device.

Power Dissipation defined as: PTOT ≡ (PDC + PIN) – POUT, where

PDC: DC Bias Power

PIN: RF Input Power

POUT: RF Output Power

Absolute Maximum Power Dissipation to be de-rated as follows above 25°C:

PTOT= 1.0W – (.0036W/°C) x THS

where THS = heatsink or ambient temperature.

This PHEMT is susceptible to damage from Electrostatic Discharge. Proper precautions should be used when handling these

devices.

• HANDLING PRECAUTIONS

To avoid damage to the devices care should be exercised during handling. Proper Electrostatic

Discharge (ESD) precautions should be observed at all stages of storage, handling, assembly, and

testing. These devices should be treated as Class 1A (0-500 V). Further information on ESD control

measures can be found in MIL-STD-1686 and MIL-HDBK-263.

• APPLICATIONS NOTES & DESIGN DATA

Applications Notes are available from your local Filtronic Sales Representative or directly from the

factory. Complete design data, including S-parameters, noise data, and large-signal models are

available on the Filtronic web site.

Phone: (408) 988-1845

Fax: (408) 970-9950

http:// www.filss.com

Revised: 1/22/01

Email: sales@filss.com

Share Link: