AIC1802 Просмотр технического описания (PDF) - Analog Intergrations
Номер в каталоге
Компоненты Описание
производитель
AIC1802 Datasheet PDF : 10 Pages
| |||
AIC1802
Two-Cell Lithium-Ion Battery Protection IC
n FEATURES
n DESCRIPTION
l Ultra-Low Quiescent Current at 10µA (VCC=7V,
VC =3.5V ).
l Ultra-Low Power-Down Current at 0.2µA (VCC
=3.8V, VC=1.9V).
l Wide Supply Range: 2 to 18V.
l Precision Overcharge Protection Voltage
4.35V ± 30mV for the AIC1802A
4.30V ± 30mV for the AIC1802B
4.25V ± 30mV for the AIC1802C
l Built-in Delay Circuits for Overcharge, Over-
discharge and Overcurrent Protection.
l Overcharge and Overdischarge Delay Time
can be Extended by External Capacitors.
l Built-in Cell-balancing Bleeding Network under
Overcharge Condition.
n APPLICATIONS
The AIC1802 battery protection IC is designed
to protect lithium-ion batteries from damage due
to overcharging, overdischarging, and
overcurrent for two series cells in portable
phones and laptop computers. It can be a part of
the low-cost charge control system within a two-
cell lithium-ion battery pack.
Safe and full utilization charging is ensured by
the accurate ±30mV overcharge detection.
Three different specification values for
overcharge protection voltage are provided for
various protection requirements. The very low
standby current drains little current from the
cells while in storage.
l Protection IC for Two-Cell Lithium-Ion Battery
Pack.
n TYPICAL APPLICATION CIRCUIT
VBAT+
BATTERY 1
**R1
C1
1µF
8 VCC
6 VC
TC 5
TD 3
*CTC
BATTERY 2
M1
CEM9926
C2
1µF
**R2
4 GND
2 OD
*CTD
OC 1
R3
CS 7
1M
AIC1802
Q1
R6
1K M2
CEM9926
*CTC & CTD are optional for delay time adjustment.
**R1 & R2: Refer application informations.
R4
1M
C3
R5
0.01µF 1M
VBAT-
Protection Circuit for Two-Cell Lithium-Ion Battery Pack
DS-1802-03 July 13, 00
www.analog.com.tw
1
Share Link: 