M215H1-L03 Просмотр технического описания (PDF) - Unspecified

Номер в каталоге

Компоненты Описание

производитель

M215H1-L03

TFT LCD Approval Specification

Unspecified 

10. Reliability Test

Environment test conditions are listed as following table.

Items

Required Condition

Temperature Humidity Bias (THB) Ta= 50℃ , 80%RH, 240hours

High Temperature Operation (HTO) Ta= 50℃ , 50%RH , 240hours

Low Temperature Operation (LTO) Ta= 0℃ , 240hours

High Temperature Storage (HTS) Ta= 60℃ , 240hours

Low Temperature Storage (LTS) Ta= -20℃ , 240hours

Doc No.: 400035745

Issued Date: 02,Oct, 2009

Model No.: M215H1-L03

Approval

Note

Vibration Test

(Non-operation)

Acceleration: 1.5 Grms

Wave: Half-sine

Frequency: 10 - 300 Hz

Sweep: 30 Minutes each Axis (X, Y, Z)

Shock Test

(Non-operation)

Thermal Shock Test (TST)

On/Off Test

ESD (Electro Static Discharge)

Acceleration: 50 G

Wave: Half-sine

Active Time: 11 ms

Direction : ± X, ± Y, ± Z.(one time for each Axis)

-20℃/30min , 60℃ / 30min , 100 cycles

25℃ ,On/10sec , Off /10sec , 30,000 cycles

Contact Discharge: ± 8KV, 150pF(330Ω)

Air Discharge: ± 15KV, 150pF(330Ω)

Altitude Test

Operation:10,000 ft / 24hours

Non-Operation:30,000 ft / 24hours

11. PRECAUTIONS

11.1 ASSEMBLY AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the module during assembly.

(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil

may cause electrical short or worsen the polarizer.

(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight

will be damaged.

(4) Always follow the correct power sequence when LCD module is connecting and operating. This can

prevent damage to the CMOS LSI chips during latch-up.

(5) Do not pull the I/F connector in or out while the module is operating.

(6) Do not disassemble the module.

(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched.

(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage

LCD module when it is operating.

(9) High temperature or humidity may reduce the performance of module. Please store LCD module

within the specified storage conditions.

24 / 27

Version 2.0

Share Link: