DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

M190A1-L07 Просмотр технического описания (PDF) - Unspecified

Номер в каталоге
Компоненты Описание
производитель
M190A1-L07
ETC
Unspecified ETC
M190A1-L07 Datasheet PDF : 25 Pages
First Prev 21 22 23 24 25
Doc. No.: 14069241
Issued Date: Feb., 13, 2007
Model No.: M190A1-L07
Approval
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil
may cause electrical short or worsen the polarizer.
(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight will
be damaged.
(4) Always follow the correct power sequence when LCD module is connecting and operating. This can
prevent damage to the CMOS LSI chips during latch-up.
.tw (5) Do not pull the I/F connector in or out while the module is operating.
(6) Do not disassemble the module.
(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and
easily scratched.
(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage
m LCD module when it is operating.
(9) High temperature or humidity may reduce the performance of module. Please store LCD module within
o the specified storage conditions.
.c (10) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the
response time will become slowly, and the starting voltage of CCFL will be higher than room
temperature.
lcd 10.2 SAFETY PRECAUTIONS
(1) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while
assembling with inverter. Do not disassemble the module or insert anything into the Backlight unit.
s (2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
.y case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
www (3) After the module’s end of life, it is not harmful in case of normal operation and storage.
23 / 25
Version 2.0

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]