PMS133/PMS134
8bit OTP MCU with 12-bit ADC
Pin Type &
Pin Name
Buffer Type
Description
PA7 /
X1 /
INT0C
IO
ST /
CMOS
The functions of this pin can be:
(1) Bit 7 of port A. It can be configured as digital input or two-state output, with pull-up
resistor.
(2) X1 is Crystal XIN(X1) when crystal oscillator is used.
(3) External interrupt line 0C. It can be used as an external interrupt line 0. Both rising
edge and falling edge are accepted to request interrupt service and configurable
by register setting
If this pin is used for crystal oscillator, bit 7 of padier register must be programmed “0”
to avoid leakage current. This pin can be used to wake-up system during sleep mode;
however, wake-up function is also disabled if bit 7 of padier register is “0”.
©Copyright 2018, PADAUK Technology Co. Ltd
Page 17 of 106 PDK-DS-PMS133/134-EN_V103 – Nov. 13, 2018