ST16C554(1994) Просмотр технического описания (PDF) - Exar Corporation

Номер в каталоге

Компоненты Описание

производитель

ST16C554
(Rev.:1994)

QUAD UART WITH 16-BYTE FIFO’S

Exar Corporation 

ST16C554/554D/68C554

SYMBOL DESCRIPTION

Symbol

-RI A-B

-RI C-D

-RTS A-B

-RTS C-D

RX A-B

RX C-D

TX A-B

TX C-D

Pin

Signal

68

64 type

Pin Description

8,28

42,62

63,19

30,50 I Ring Indicator (active low) - These inputs are associated

with individual UART channels, A through D. A logic 0 on

this pin indicates the modem has received a ringing signal

from the telephone line. A logic 1 transition on this input pin

will generate an interrupt.

14,22

48,56

5,13

36,44 O Request to Send (active low) - These outputs are associated

with individual UART channels, A through D. A logic 0 on the

-RTS pin indicates the transmitter has data ready and

waiting to send. Writing a logic 1 in the modem control

register (MCR bit-1) will set this pin to a logic 0 indicating

data is available. After a reset this pin will be set to a logic

1. This pin has no effect on the UART’s transmit or receive

operation.

7,29

41,63

62,20

29,51 I Receive Data Input RX A-D. - These inputs are associated

with individual serial channel data to the ST16C554D. The

RX signal will be a logic 1 during reset, idle (no data), or

when the transmitter is disabled. During the local loopback

mode, the RX input pin is disabled and TX data is internally

connected to the UART RX Input, internally.

17,19

51,53

8,10

39,41 O Transmit Data - These outputs are associated with indi-

vidual serial transmit channel data from the 554D. The TX

signal will be a logic 1 during reset, idle (no data), or when

the transmitter is disabled. During the local loopback mode,

the TX input pin is disabled and TX data is internally

connected to the UART RX Input.

Rev. 3.10

10

Share Link: