ATMEGA32(2008) Просмотр технического описания (PDF) - Atmel Corporation

Номер в каталоге

Компоненты Описание

производитель

ATMEGA32
(Rev.:2008)

8-bit Microcontroller with 32K Bytes In-System Programmable Flash

Atmel Corporation 

AVR ATmega32

Memories

This section describes the different memories in the ATmega32. The AVR architecture has two

main memory spaces, the Data Memory and the Program Memory space. In addition, the

ATmega32 features an EEPROM Memory for data storage. All three memory spaces are linear

and regular.

In-System

Reprogrammable

Flash Program

Memory

The ATmega32 contains 32K bytes On-chip In-System Reprogrammable Flash memory for pro-

gram storage. Since all AVR instructions are 16 or 32 bits wide, the Flash is organized as 16K x

16. For software security, the Flash Program memory space is divided into two sections, Boot

Program section and Application Program section.

The Flash memory has an endurance of at least 10,000 write/erase cycles. The ATmega32 Pro-

gram Counter (PC) is 14 bits wide, thus addressing the 16K program memory locations. The

operation of Boot Program section and associated Boot Lock bits for software protection are

described in detail in “Boot Loader Support – Read-While-Write Self-Programming” on page

244. “Memory Programming” on page 256 contains a detailed description on Flash Program-

ming in SPI, JTAG, or Parallell Programming mode.

Constant tables can be allocated within the entire program memory address space (see the LPM

– Load Program Memory Instruction Description).

Timing diagrams for instruction fetch and execution are presented in “Instruction Execution Tim-

ing” on page 13.

Figure 8. Program Memory Map

$0000

Application Flash Section

Boot Flash Section

$3FFF

16 ATmega32(L)

2503N–AVR–06/08

Share Link: