ADDC02812DA Просмотр технического описания (PDF) - Analog Devices
Номер в каталоге
Компоненты Описание
производитель
ADDC02812DA Datasheet PDF : 20 Pages
| |||
ADDC02812DA/ADDC02815DA
Screening Levels for ADDC02812DA AND ADDC02815DA
Screening Steps
Industrial (KV)
Ruggedized Industrial (TV) MIL-STD-883B/SMD (TV/883B)
Pre-Cap Visual
100%
MIL-STD-883, TM2017
Temp Cycle
N/A
N/A
Constant Acceleration N/A
N/A
Fine Leak
Guaranteed to Meet
MIL-STD-883, TM1014
Guaranteed to Meet
MIL-STD-883, TM1014
Compliant to MIL-PRF-38534
Gross Leak
Guaranteed to Meet
MIL-STD-883, TM1014
Guaranteed to Meet
MIL-STD-883, TM1014
Burn-In
N/A
MIL-STD-883, TM1015,
96 Hrs at +115°C Case
OBSOLETE Final Electrical Test
At +25°C, Per Specification
Table
At +25°C, Per Specification
Table
NOMINAL CASE DIMENSIONS IN INCHES AND (mm)
[All tolerances ± 0.005" (± 0.13 mm) unless otherwise specified]
0.100 (2.54)
8 PLCS
0.149 (3.78) 0.300 (7.62) SQ
0.150 (3.81) DIA TYP
4 PLCS
± 0.010
4 PLCS
0.150 (3.81)
0.200 (5.08)
0.200 (5.08)
TOP VIEW
1.500 ± 0.010
(38.10 ± 0.25)
1.800
(45.72)
TYP
0.200 (5.08) 5 PLCS
0.250 (6.35)
2.100 ± 0.010
(53.34 ± 0.25)
2 PLCS
0.150 (3.81)
0.390 ± 0.010
(9.91 ± 0.25)
0.800 ± 0.010
(20.32 ± 0.25)
4 PLCS
1.145 (29.08)
2 PLCS
2.745 ± 0.010
(69.72 ± 0.25)
0.040 ± 0.003
(1.02 ± 0.08)
0.090 ± 0.010
(2.29 ± 0.25)
NOTES
1The final product weight is 85 grams maximum.
2The package base material if made of molybdenum and is nominally 40 mils (1.02 mm) thick. The “runout” is less than 2 mils per inch (0.02 mm per cm).
3The high current pins (10–17) are 40 mil (1.02 mm) diameter; are 99.8% copper; and are plated with gold over nickel.
4The signal carrying pins (1–9) are 18 mil (0.46 mm) diameter; are Kovar; and are plated with gold over nickel.
5All pins are a minimum length of 0.740 inches (18.80 mm) when the product is shipped. The pins are typically bent up or down and cut shorter for proper connection
into the user’s system.
6All pin-to-sidewall spacings are guaranteed for a minimum of 500 V dc breakdown at standard air pressure.
7The case outline was originally designed using the inch-pound units of measurement. In the event of conflict between the metric and inch-pound units, the inch-
pound shall take precedence.
REV. 0
–17–
Share Link: 