BTS721L1 Просмотр технического описания (PDF) - Infineon Technologies

Номер в каталоге

Компоненты Описание

производитель

BTS721L1

Smart Four Channel Highside Power Switch

Infineon Technologies 

Package and Ordering Code

Standard P-DSO-20-9

BTS721L1

Ordering Code

Q67060-S7002-A2

All dimensions in millimetres

1) Does not include plastic or metal protrusions of 0.15 max per side

2) Does not include dambar protrusion of 0.05 max per side

Definition of soldering point with temperature Ts:

upper side of solder edge of device pin 15.

Pin 15

Printed circuit board (FR4, 1.5mm thick, one layer

70µm, 6cm2 active heatsink area) as a reference for

max. power dissipation Ptot, nominal load current

IL(NOM) and thermal resistance Rthja

BTS721L1

Published by

Infineon Technologies AG,

St.-Martin-Strasse 53,

D-81669 München

© Infineon Technologies AG 2001

All Rights Reserved.

Attention please!

The information herein is given to describe certain components and

shall not be considered as a guarantee of characteristics.

Terms of delivery and rights to technical change reserved.

We hereby disclaim any and all warranties, including but not limited

to warranties of non-infringement, regarding circuits, descriptions

and charts stated herein.

Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions

and prices please contact your nearest Infineon Technologies Office

in Germany or our Infineon Technologies Representatives worldwide

(see address list).

Warnings

Due to technical requirements components may contain dangerous

substances. For information on the types in question please contact

your nearest Infineon Technologies Office.

Infineon Technologies Components may only be used in life-support

devices or systems with the express written approval of Infineon

Technologies, if a failure of such components can reasonably be

expected to cause the failure of that life-support device or system, or

to affect the safety or effectiveness of that device or system. Life

support devices or systems are intended to be implanted in the

human body, or to support and/or maintain and sustain and/or

protect human life. If they fail, it is reasonable to assume that the

health of the user or other persons may be endangered.

Semiconductor Group

15

2003-Oct-01

Share Link: