L6610D Просмотр технического описания (PDF) - STMicroelectronics

Номер в каталоге

Компоненты Описание

производитель

L6610D

DIGITALLY PROGRAMMABLE SECONDARY HOUSEKEEPING CONTROLLER

STMicroelectronics 

L6610

3 NORMAL OPERATION TIMING DIAGRAM (FIG. 20)

The time intervals t1-t5 are listed below

– t1: UV/OC blanking of MFAULT. While Main outputs are ramping up, the UV comparators are blanked

for this interval to prevent a false turn-off. No such blanking is applied to OV faults.

– t2: PW-OK delay. This period starts when all monitored outputs and AC sense are above their respec-

tive UV levels and finishes at PW-OK going high.

– t3: PS-ON debounce period. The voltage on PS-ON must be continuously present in a high or low state

for a minimum period for that state to be recognized.

– t4: Tdelay. The time from PS-ON being recognized as going high to MFAULT going high. This is to

provide a power down warning. When PS-ON requests power off, PW-OK goes low immediately.

– t5: UV blanking of DFAULT. During initial power up a period of UV blanking is applied to DFAULT as

soon as Vdd to the chip is in the correct range. No such blanking is applied to OV faults.

Figure 20. Normal Operation Timing Diagram (ON/OFF with PS-ON or the AC power switch).

On

AC

Off

Vdd

Vdd(on)

Vdd(on)

Vdd-ok

t5

UVBdfault

ACsns

Off

PS-ON On

Mfault

Main

OPs

POK

UVBmfault

ACsns_high

t3

t2

t4

t1

ACsns_low

t3

t2

t1

20/29

Share Link: