SHARP
LHFl6J04
16
.. 12 Block Locking by the WP#
his Boot Block Flash memory architecture features two
ardware-lockable boot blocks so that the kernel code for
le system can be kept secure while other blocks are
rogrammed or erased as necessary.
he lockable blocks are locked when WP#=V,: any
rogram or erase operation to a locked block will result in
an error. which will be reflected in the status register. FOI
top configuration. the top two boot blocks are lockable
For the bottom configuration. the bottom two boot block:
are lockable. If WP# is V,, and block lock-bit is not set
boot block can be programmed or erased normally (Unles:
Vccw is below V,,,,,). WP# is valid only two boo
blocks. other blocks are not affected.
Table 5. Write Protection Alternatives
‘1,
0
1
Set
‘VCCWLK
’
X
Permanent >VcCWLK V,
X
Lock-Bit
VI,
X
X
X Clear Block Lock-Bits Enabled.
X
X Clear Block Lock-Bits Disabled.
X
X Set Permanent Lock-Bit Disabled.
X
X Set Permanent Lock-Bit Disabled.
X
X Set Permanent Lock-Bit Enabled.
Rev. 1.25