S25FL127S
6.3 WSON 6 x 5 Package
6.3.1
WSON 6 x 5 mm Connection Diagram
Figure 38. 8-Contact WSON 6 x 5 mm, Top View
CS#
SO/IO1
WP#/IO2
VSS
1
8
2
7
WSON
3
6
4
5
VCC
HOLD#/IO3 or IO3/RESET#
SCK
SI/IO0
Notes:
1. Lead 7 HOLD# / IO3 or IO3 / RESET# function depends on the selected configuration, If the IO3 / RESET# function is used, the host system should actively or
passively pull-up the IO3 / RESET# connection when Quad mode is not enabled, or when CS# is high and a Reset operation is not intended.
2. There is an exposed central pad on the underside of the WSON package. This pad should not be connected to any voltage or signal line on the PCB. Connecting the
central pad to GND (VSS) is possible, provided PCB routing ensures 0 mV difference between voltage at the WSON GND (VSS) lead and the central exposed pad.
Document Number: 001-98282 Rev. *I
Page 41 of 142