M52743BSP
VSC2 Sub Contrast Control Characteristics2
Measuring condition and procedure are the same as described in VSC1.
∆VSC2 Sub Contrast Control Relative Characteristics2
Measuring condition and procedure are the same as described in ∆VSC1.
VSC3 Sub Contrast Control Characteristics3
Measuring condition and procedure are the same as described in VSC1.
∆VSC3 Sub Contrast Control Relative Characteristics3
Measuring condition and procedure are the same as described in ∆VSC1.
VMSC Main/sub Contrast Control Characteristics2
Measure the amplitude output at OUT (29, 32, 35). The measured value is called VOUT (29, 32, 35). Main/Sub
contrast control characteristics VMSC1 is calculated by the equation below:
VOUT
VMSC1 = 20log
(dB)
0.7
∆VMSC Main/sub Contrast Control Relative Characteristics2
Relative characteristics ∆VMSC1 is calculated by the equation below:
∆VMSC = VOUT (29) / VOUT (32),
VOUT (32) / VOUT (35),
VOUT (35) / VOUT (29)
ABL1 ABL Control Characteristics1
Measure the amplitude output at OUT (29, 32, 35). The measured value is called VOUT (29, 32, 35), and is treated as
ABL1.
∆ABL1 ABL Control Relative Characteristics1
Relative characteristics ∆ABL1 is calculated by the equation below:
∆ABL1 = VOUT (29) / VOUT (32),
VOUT (32) / VOUT (35),
VOUT (35) / VOUT (29)
ABL2 ABL Control Characteristics2
Measuring condition and procedure are the same as described in ABL1.
∆ABL2 ABL Control Relative Characteristics2
Measuring condition and procedure are the same as described in ∆ABL1.
REJ03F0193-0201 Rev.2.01 Mar 31, 2008
Page 9 of 25