14D101K Просмотр технического описания (PDF) - Ruilongyuan Electronics Co.,Ltd
Номер в каталоге
Компоненты Описание
производитель
14D101K Datasheet PDF : 7 Pages
| |||
Metal Oxide Varistors - 14D Series
Electrical Rating
ltem
Test Condition / Description
Requirement
Varistor Voltage
The voltage between two terminals with the specified measuring current 1mA.
DC applied is call Vb.
Maximum Allowable
Voltage
The recommended maximum sine wave
voltage can be applied continuously.
voltage
(RMS)
or
the maximum DC
Rated Wattaget
The maximum average power that can be applied within the specified ambient
temperature.
To meet
the specified
value
IEnergy
The maximum energy within the varistor voltage change of ±10% when one impulse
of10/1000μsec. or 2 msec. is applied.
Withstanding Surge
Current
The maximum current within the varistor voltage change of ±10% with the standard
impulse current (8/20μsec.) applied one time.
Surge Life
The change of Vb shall be measured after the impulse listed below is applied 10,000
times continuously with the interval of ten seconds at room temperature.
5D series
7Dseries
10D series
14D series
20D series
180K to 680K
820K to 751K
180K to 680K
820K to 821K
180K to 680K
820K to 182K
180K to 680K
820K to 182K
180K to 680K
820K to 182K
10A (8/20μsec.)
20A (8/20μsec.)
25A (8/20μsec.)
50A (8/20μsec.)
50A (8/20μsec.)
100A (8/20μsec.)
75A (8/20μsec.)
150A (8/20μsec.)
100A (8/20μsec.)
200A (8/20μsec.)
Vb <+_10%
Vb
Circuit Protection
System
Specifications are subject to change without notice.
Please refer to http://www.ruilon.com for current information. Page:3
Share Link: 