MPC8275CZUM Просмотр технического описания (PDF) - Freescale Semiconductor

Номер в каталоге

Компоненты Описание

производитель

MPC8275CZUM

PowerQUICC II Family Hardware Specifications

Freescale Semiconductor 

Thermal Characteristics

4 VIL for IIC interface does not match IIC standard, but does meet IIC standard for VOL and should not cause any compatibility

issue.

5 MPC8280, MPC8275VR, MPC8275ZQ only.

4 Thermal Characteristics

This table describes thermal characteristics for both the packages. See Table 2 for information on a given

SoC’s package. Discussions of each characteristic are provided in Section 4.1, “Estimation with

Junction-to-Ambient Thermal Resistance,” and Section 4.5, “Experimental Determination.” For the these

discussions, PD = (VDD × IDD) + PI/O, where PI/O is the power dissipation of the I/O drivers.

Table 6. Thermal Characteristics

Characteristic

Symbol

Value

480 TBGA

516 PBGA

Unit

Air Flow

Junction to ambient—

16

single-layer board1

RθJA

11

27

Natural convection

°C/W

21

1 m/s

Junction to ambient—

12

four-layer board

RθJA

9

19

Natural convection

°C/W

16

1 m/s

Junction to board2

RθJB

6

11

°C/W

—

Junction to case3

RθJC

2

8

°C/W

—

Junction-to-package top4

ΨJT

2

2

°C/W

—

1 Assumes no thermal vias

2 Thermal resistance between the die and the printed circuit board per JEDEC JESD51-8. Board temperature is measured on

the top surface of the board near the package.

3 Thermal resistance between the die and the case top surface as measured by the cold plate method (MIL SPEC-883 Method

1012.1).

4 Thermal characterization parameter indicating the temperature difference between package top and the junction temperature

per JEDEC JESD51-2. When Greek letters are not available, the thermal characterization parameter is written as Psi-JT.

4.1 Estimation with Junction-to-Ambient Thermal Resistance

An estimation of the chip junction temperature, TJ, in C can be obtained from the following equation:

TJ = TA + (RθJA × PD)

where:

TA = ambient temperature (ºC)

RθJA = package junction-to-ambient thermal resistance (ºC/W)

PD = power dissipation in package

The junction-to-ambient thermal resistance is an industry standard value that provides a quick and easy

estimation of thermal performance. However, the answer is only an estimate; test cases have demonstrated

that errors of a factor of two (in the quantity TJ – TA) are possible.

MPC8280 PowerQUICC II Family Hardware Specifications, Rev. 2

12

Freescale Semiconductor

Share Link: