GMA.2B.045.DG Просмотр технического описания (PDF) - Unspecified
Номер в каталоге
Компоненты Описание
производитель
GMA.2B.045.DG Datasheet PDF : 186 Pages
| |||
®
®
Watertight or vacuumtight models
These plug, socket and coupler models allow the device on which they are fitted to reach a protection index of IP68 as per
IEC 60529. They are fully compatible with plugs of the same series and are widely used for portable radios, military, labo-
ratory equipment, aviation, etc.
These models are identified by a letter «P» at the end of the reference.
Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at
the end of the part number (certificate on request).
Epoxy resin is used to seal these models.
Technical Characteristics
Mechanical and Climatical
Characteristics
Value
Standard
Endurance
> 5000 cycles IEC 60512-5 test 9a
Humidity
up to 95% at 60° C
Temperature range (00 to 1B)
- 20° C/+100° C
Temperature range (2B to 5B)
- 20° C/+80° C
Salt spray corrosion test
> 144h
IEC 60512-6 test 11f
Climatical category
20/80/21
IEC 60068-1
Leakage rate (He)1)
< 10-7 mbar.l.s-1 IEC 60512-7 test 14b
Note: 1) only for vacuumtight models.
Characteristics
Value
Standard
Maximum operating
pressure2)
00 60 bars
0B 60 bars
1B 60 bars
2B 40 bars
3B 30 bars
4B 15 bars
5B 5 bars
IEC 60512-7 test 14d
Note: 2) this value corresponds to the maximum allowed pressure differ-
ence for the assembled socket.
L maxi
S3
M
E maxi
S1
L maxi
S3
M
E maxi
S1
YHG Fixed plug, nut fixing, non-latching,
key (G) or keys (A…M)
Reference
Dimensions (mm)
Model Series A B
e
E L M S1 S3
YHG
YHG
YHG
YHG
0B 13.0 12.4 M9x0.6 2.4 24.1 14.2 8.2 11
1B 16.0 15.8 M12x1.0 3.9 28.0 16.2 10.5 14
2B 19.0 19.2 M15x1.0 5.5 33.1 17.8 13.5 17
3B 22.0 25.0 M18x1.0 5.1 38.2 22.2 16.5 22
P9 Panel cut-out (page 152)
Note: this model does not include an O-ring behind the flange, it ensures
only IP61 protection index. Consequently, it is not vacuumtight. Water-
tightness (when mated) is only ensured with HHG and HCG sockets.
HGG Fixed socket, nut fixing, key (G) or keys
(A…M and R), watertight or vacuumtight
Reference
Model Series
HGG
00
HGG
0B
HGG
1B
HGG
2B
HGG
3B
HGG
4B
HGG
5B
Dimensions (mm)
AB
e
E L M S1 S3
11 10.2 M7x0.5 8.0 18.0 1.5 – 9
13 12.4 M9x0.6 7.0 21.5 3.0 8.2 11
18 15.8 M12x1.0 7.0 26.6 4.5 10.5 14
20 19.2 M15x1.0 8.0 31.6 4.0 13.5 17
25 25.0 M18x1.0 11.5 36.1 4.0 16.5 22
34 34.0 M25x1.0 11.0 43.1 4.0 23.5 30
45 40.0 M35x1.0 11.0 53.6 5.0 33.5 –
P9 Panel cut-out (page 152)
Note: the 5B series is delivered with a tapered washer and a round nut.
26
www.lemo.com
Share Link: 