SAM7SE32 Просмотр технического описания (PDF) - Atmel Corporation

Номер в каталоге

Компоненты Описание

производитель

SAM7SE32

AT91SAM ARM-based Flash MCU

Atmel Corporation 

• One external 2.2 µF (or 3.3 µF) X7R capacitor should be connected between VDDOUT and

GND.

Adequate input supply decoupling is mandatory for VDDIN in order to improve startup stability

and reduce source voltage drop. The input decoupling capacitor should be placed close to the

chip. For example, two capacitors can be used in parallel: 100 nF NPO and 4.7 µF X7R.

5.4 Typical Powering Schematics

The SAM7SE512/256/32 supports a 3.3V single supply mode. The internal regulator input con-

nected to the 3.3V source and its output feeds VDDCORE and the VDDPLL. Figure 5-1 shows

the power schematics to be used for USB bus-powered systems.

Figure 5-1. 3.3V System Single Power Supply Schematic

VDDFLASH

Power Source

ranges

from 4.5V (USB)

to 18V

DC/DC Converter

3.3V

VDDIO

VDDIN

VDDOUT

Voltage

Regulator

VDDCORE

VDDPLL

14 SAM7SE512/256/32

6222H–ATARM–25-Jan-12

Share Link: