DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

TDA1001BT Просмотр технического описания (PDF) - Philips Electronics

Номер в каталоге
Компоненты Описание
производитель
TDA1001BT Datasheet PDF : 13 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Philips Semiconductors
Interference and noise suppression circuit
for FM receivers
Product specification
TDA1001B
TDA1001BT
PARAMETER
SYMBOL
MIN.
TYP. MAX. UNIT
Noise threshold feedback control (notes 1 and 3)
Noise input voltage (r.m.s. value) f = 120 kHz
sinewave for V12-9 = 300 mV
at R13 = 0
at R13 = 2,7 k
for V12-9 = 425 mV (Vi(tr)O + 3 dB)
at R13 = 0
at R13 = 2,7 k
for V12-9 = 560 mV (Vi(tr)O + 20 dB)
at R13 = 0
at R13 = 2,7 k
Amplification control voltage by interference intensity
(note 4)
Vni(rms)
Vni(rms)
Vni(rms)
Vni(rms)
Vni(rms)
Vni(rms)
2,3
3,3
4,3
mV
8,2
mV
7,3
mV
16,5
mV
33
45
57
mV
107
mV
Vi(rms) = 50 mV; f = 19 kHz;
Vi(tr)M = 300 mV; r.m.s. value
at repetition frequency fr = 1 kHz
at repetition frequency fr = 16 kHz
Vo6(rms)
Vo6(rms)
49
56
mV
45
65
mV
Notes to application information
1. The interference suppression and noise feedback control thresholds can be determined by R13 or a capacitive
voltage divider at the input of the high-pass filter and they are defined by the following formulae:
Vi(tr) = (1 + R13/RS) × Vi(tr)O in which RS = 2 k;
Vni = (1 + R13/RS) × VniO in which RS = 2 k.
2. The suppression pulse duration is determined by C11 = 2,2 nF and R11 = 6,8 k.
3. The characteristic of the noise feedback control is determined by R12 (and R10).
4. The feedback control of the interference suppression threshold at higher repetition frequencies is determined by R10
(and R12).
5. The 19 kHz generator can be adjusted with R7-16 (and R7-8). Adjustment is not required if components with small
tolerances are used e.g. R < 1% and C < 2%.
6. Measuring conditions:
The peak output noise voltage (Vno m, CCITT filter) shall be measured at the output with a de-emphazing time T = 50
µs (R = 5 k, C = 10 nF); the reference value of 0 dB is Vo int with the 19 kHz generator short-circuited (pin 7
grounded).
December 1982
8

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]