M52749FP
VMSC Main/sub Contrast Control Characteristics
Measure the amplitude output at OUT (33, 38, 41). The measured value is called VMSC.
∆VMSC Main/sub Contrast Control Relative Characteristics
Relative characteristics ∆VMSC is calculated by the equation below:
∆VMSC = VOUT (33) / VOUT (38),
VOUT (38) / VOUT (41),
VOUT (41) / VOUT (33).
ABL1 ABL Control Characteristics1
Measure the amplitude output at OUT (33, 38, 41). The measured value is called VOUT (33, 38, 41), and is treated as
ABL1.
∆ABL1 ABL Control Relative Characteristics1
Relative characteristics ∆ABL1 is calculated by the equation below:
∆ABL1 = VOUT (33) / VOUT (38),
VOUT (38) / VOUT (41),
VOUT (41) / VOUT (33).
ABL2 ABL Control Characteristics2
Measuring condition and procedure are the same as described in ABL1.
∆ABL2 ABL Control Relative Characteristics2
Measuring condition and procedure are the same as described in ∆ABL1.
VB1 Brightness Control Characteristics1
Measure the DC voltage at OUT (33, 38, 41) with a voltmeter. The measured value is called VOUT (33, 38, 41), and is
treated as VB1.
∆VB1 Brightness Control Relative Characteristics1
Relative characteristics ∆VB1 is calculated by the difference in the output between the channels.
∆VB1 = VOUT (33) – VOUT (38),
VOUT (38) – VOUT (41),
VOUT (41) – VOUT (33).
VB2 Brightness Control Characteristics2
Measuring condition and procedure are the same as described in VB1.
∆VB2 Brightness Control Relative Characteristics2
Measuring condition and procedure are the same as described in ∆VB1.
VB3 Brightness Control Characteristics3
Measuring condition and procedure are the same as described in VB1.
∆VB3 Brightness Control Relative Characteristics3
Measuring condition and procedure are the same as described in ∆VB1.
REJ03F0194-0201 Rev.2.01 Mar 31, 2008
Page 12 of 26