PT2386 Просмотр технического описания (PDF) - Princeton Technology

Номер в каталоге

Компоненты Описание

производитель

PT2386

3D Effect IC

Princeton Technology 

Tel: 886-2-66296288

Fax: 886-2-29174598

URL: http://www.princeton.com.tw

3D Effect IC

PT2386

Notes:

1. Dimensioning and tolerancing per ANSI Y14.5-1982.

2. Dimension “D” does not include mold flash, protrusions or gate burrs. Mold flash protrusion or

gate burrs shall not exceed 0.15mm (0.006 in) per side.

3. Dimension “E” does not include interlead flash or protrusions. Interlead flash or protrusions shall not

exceed 0.25mm (0.010 in) per side.

4. The chamfer on the body is optional. It is not present, a visual index feature must be located within

the crosshatched area.

5. “L” is the length of the terminal for soldering to substrate.

6. “N” is the number of terminal positions. (N=18)

7. The lead width “B” as measured 0.36mm (0.014 in) or greater above the seating plane, shall not

exceed a maximum value of 0.61mm (0.24 in)

8. Controlling dimension: MILLIMETER.

9. Refer to JEDEC MS-013 Variation AB.

JEDEC is the trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.

PT2386 V1.1

- 16 -

February, 2006

Share Link: