PEB 20321
Introduction
Table 2
Dedicated Pins
Pin No. Pin No. Symbol I/O Function
P-MQFP- P-TQFP-
160-1
176-1
86
96
DEMUX I PCI/De-multiplexed Mode Select
DEMUX = 0 indicates normal PCI operation.
DEMUX = 1 indicates that the MUNICH32X is
operated in De-multiplexed mode.
62
68
W/R I/O Write/Read
This signal distinguishes write and read
operations in the De-multiplexed mode. It is
tristate when the MUNICH32X is in PCI mode.
A Pull-Up resistor to VDD3 is recommended if
De-multiplexed mode is not used.
10
12
RES. 1
61
67
RES. 2
5, 17, 27, 7, 19, 29, VSS
37, 47, 58, 39, 53,
69, 92, 94, 64, 75,
95, 113, 102, 104,
124, 133, 105, 123,
135, 145, 138, 147,
155
149, 159,
169
I/O Reserved.
A Pull-Up resistor to VDD3 is recommended.
O Reserved.
A Pull-Up resistor to VDD3 is recommended.
– Ground (0 V)
All pins must have the same level.
4, 16, 26,
36, 48, 59,
70, 93, 96,
114, 123,
134, 144,
154
6, 18, 28,
38, 54,
65, 76,
103, 106,
124, 137,
148, 158,
168
VDD3
– Supply Voltage 3.3 V ± 0.3 V
All pins must have the same level.
14, 15
16, 17
VDD5
– Supply Voltage 5 V ± 0.25 V
All pins must have the same level.
87
97
TEST I Test Input
When set to VDD3 the MUNICH32X works in test
mode.
It must be set to VSS for normal working mode.
Semiconductor Group
21
1998-08-01