MURS120T3 Series
Preferred Devices
Surface Mount
Ultrafast Power Rectifiers
MURS105T3, MURS110T3, MURS115T3,
MURS120T3, MURS140T3, MURS160T3
Ideally suited for high voltage, high frequency rectification, or as
free wheeling and protection diodes in surface mount applications
where compact size and weight are critical to the system.
• Small Compact Surface Mountable Package with J–Bend Leads
• Rectangular Package for Automated Handling
• High Temperature Glass Passivated Junction
• Low Forward Voltage Drop (0.71 to 1.05 Volts Max @ 1.0 A,
TJ = 150°C)
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 95 mg (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Shipped in 12 mm Tape and Reel, 2500 units per reel
• Polarity: Polarity Band Indicates Cathode Lead
• Marking: U1A, U1B, U1C, U1D, U1G, U1J
MAXIMUM RATINGS
Please See the Table on the Following Page
http://onsemi.com
ULTRAFAST RECTIFIERS
1.0 AMPERE
50–600 VOLTS
SMB
CASE 403A
MARKING DIAGRAM
U1x
U1x= Device Code
x = Specific Device Code
= A, B, C, D, G or J
ORDERING INFORMATION
See detailed ordering and shipping information in the table on
page 2 of this data sheet.
DEVICE MARKING INFORMATION
See general marking information in the device marking table
on page 2 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
© Semiconductor Components Industries, LLC, 2000
1
October, 2000 – Rev. 5
Publication Order Number:
MURS120T3/D