M38C30E1AXXXFP Просмотр технического описания (PDF) - Renesas Electronics

Номер в каталоге

Компоненты Описание

производитель

M38C30E1AXXXFP

SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

Renesas Electronics 

HARDWARE

PIN DESCRIPTION

PIN DESCRIPTION

Table 1 Pin description (1)

Pin

VCC, VSS

VREF

AVSS

RESET

XIN

XOUT

VL1 – VL3

COM0 –

COM3

Name

Power source

Analog reference

voltage

Analog power

source

Reset input

Clock input

Clock output

LCD power

source

Common output

P00/SEG8 – I/O port P0

P07/SEG15

P10/SEG16 – I/O port P1

P17/SEG23

P20/SEG0 – I/O port P2

P27/SEG7

Function

• Apply voltage of 2.5V V to 5.5 V to VCC, and 0 V to VSS.

• Reference voltage input pin for A-D converter.

Function except a port function

• GND input pin for A-D converter.

• Connect to VSS.

• Reset input pin for active “L.”

• Input and output pins for the main clock generating circuit.

• Feedback resistor is built in between XIN pin and XOUT pin.

• Connect a ceramic resonator or a quartz-crystal oscillator between the XIN and XOUT pins to set the

oscillation frequency.

• If an external clock is used, connect the clock source to the XIN pin and leave the XOUT pin open.

• Input 0 ≤ VL1 ≤ VL2 ≤ VL3 ≤ VCC voltage.

• Input 0 – VL3 voltage to LCD.

• LCD common output pins.

• COM1, COM2, and COM3 are not used at 1/1 duty ratio.

• COM2 and COM3 are not used at 1/2 duty ratio.

• COM3 is not used at 1/3 duty ratio.

• 8-bit I/O port.

• CMOS compatible input level.

• CMOS 3-state output structure.

• I/O direction register allows each port to be individually

programmed as either input or output.

• Pull-down control is enabled.

• LCD segment pins

P30/SEG24 – Output port P3

P37/SEG31

P40/SCLK2

P41/T1OUT

P42/T3OUT

P43/φ

P44/SIN,

P45/SOUT,

P46/SCLK1,

P47/SRDY

I/O port P4

• 8-bit output port.

• CMOS state output.

• Pull-down control is enabled.

• 8-bit I/O port.

• CMOS compatible input level.

• CMOS 3-state output structure.

• I/O direction register allows each pin to be individually

programmed as either input or output.

• Pull-up control is enabled.

V Mask ROM version of M version is 2.2 V to 5.5 V.

• Serial I/O function pin

• Timer output pin

• Timer output pin

• φ output pin

• Serial I/O function pins

1-4

38C3 Group User’s Manual

Share Link: