ADDC02812DATV Просмотр технического описания (PDF) - Analog Devices
Номер в каталоге
Компоненты Описание
производитель
ADDC02812DATV Datasheet PDF : 20 Pages
| |||
Screening Steps
Pre-Cap Visual
Temp Cycle
Constant Acceleration
Fine Leak
Gross Leak
Burn-In
Final Electrical Test
ADDC02812DA/ADDC02815DA
Screening Levels for ADDC02812DA AND ADDC02815DA
Industrial (KV)
100%
N/A
N/A
Guaranteed to Meet
MIL-STD-883, TM1014
Guaranteed to Meet
MIL-STD-883, TM1014
N/A
At +25°C, Per Specification
Table
Ruggedized Industrial (TV)
MIL-STD-883, TM2017
N/A
N/A
Guaranteed to Meet
MIL-STD-883, TM1014
Guaranteed to Meet
MIL-STD-883, TM1014
MIL-STD-883, TM1015,
96 Hrs at +115°C Case
At +25°C, Per Specification
Table
MIL-STD-883B/SMD (TV/QMLH)
Compliant to MIL-PRF-38534
NOMINAL CASE DIMENSIONS IN INCHES AND (mm)
[All tolerances ± 0.005" (± 0.13 mm) unless otherwise specified]
0.100 (2.54)
8 PLCS
0.149 (3.78) 0.300 (7.62) SQ
0.150 (3.81) DIA TYP
؎ 0.010
4 PLCS
4 PLCS
0.150 (3.81)
0.200 (5.08)
0.200 (5.08)
0.150 (3.81)
0.390 ؎ 0.010
(9.91 ؎ 0.25)
TOP VIEW
0.800 ؎ 0.010
(20.32 ؎ 0.25)
4 PLCS
1.145 (29.08)
2 PLCS
2.745 ؎ 0.010
(69.72 ؎ 0.25)
1.500 ؎ 0.010
(38.10 ؎ 0.25)
1.800
(45.72)
TYP
0.200 (5.08) 5 PLCS
0.250 (6.35)
2 PLCS
2.100 ؎ 0.010
(53.34 ؎ 0.25)
0.040 ؎ 0.003
(1.02 ؎ 0.08)
0.090 ؎ 0.010
(2.29 ؎ 0.25)
NOTES
1The final product weight is 85 grams maximum.
2The package base material if made of molybdenum and is nominally 40 mils (1.02 mm) thick. The “runout” is less than 2 mils per inch (0.02 mm per cm).
3The high current pins (10–17) are 40 mil (1.02 mm) diameter; are 99.8% copper; and are plated with gold over nickel.
4The signal carrying pins (1–9) are 18 mil (0.46 mm) diameter; are Kovar; and are plated with gold over nickel.
5All pins are a minimum length of 0.740 inches (18.80 mm) when the product is shipped. The pins are typically bent up or down and cut shorter for proper connec-
tion into the user’s system.
6All pin-to-sidewall spacings are guaranteed for a minimum of 500 V dc breakdown at standard air pressure.
7The case outline was originally designed using the inch-pound units of measurement. In the event of conflict between the metric and inch-pound units, the inch-
pound shall take precedence.
REV. A
–19–
Share Link: 