NCP1217P133 Просмотр технического описания (PDF) - ON Semiconductor

Номер в каталоге

Компоненты Описание

производитель

NCP1217P133

Enhanced PWM Current−Mode Controller for High−Power Universal Off−Line Supplies

ON Semiconductor 

NCP1217, NCP1217A

Power P1

Power P2

Power P3

Figure 20. Output Pulses at Various Power Levels (X = 5.0 ms/div) P1 t P2 t P3

300 M

200 M

100 M

0

MAX PEAK

CURRENT

SKIP CYCLE

CURRENT LIMIT

315.40 U 882.70 U 1.450 M

2.017 M

2.585 M

Figure 21. The Skip Cycle Takes Place at Low Peak Currents which Guarantees Noise−Free Operation

Sufficient margin shall be kept between normal Pin1 level and the latchoff point in order to avoid false triggering.

Ramp Compensation

Ramp compensation is a known mean to cure

subharmonic oscillations. These oscillations take place at

half the switching frequency and occur only during

Continuous Conduction Mode (CCM) with a duty−cycle

greater than 50%. To lower the current loop gain, one usually

injects between 50 and 100% of the inductor down−slope.

Figure 22 depicts how internally the ramp is generated.

http://onsemi.com

11

Share Link: