AD7769 Просмотр технического описания (PDF) - Analog Devices

Номер в каталоге

Компоненты Описание

производитель

AD7769

LC2MOS Analog I/O Port

Analog Devices 

AD7769

Multichannel Expansion

In some applications, more than two analog input channels are

required to be converted by the ADC. Figure 31 shows a circuit

configuration for such an application. The ADG528A is a

latched, B-channel analog multiplexer that is ideally suited for

this application since it is specified for single supply operation

(+12 V ± 10%).

The CS, ADC/DAC and WR inputs of the AD7769 are gated to

drive the WR input of the ADG528A. The multiplexer input

signal is selected on the falling edge of the WR pulse while the

signal is latched on the rising edge. Also, on the rising edge of

WR, the AD7769 ADC starts conversion. Therefore, the output

signal of the multiplexer must have settled to within 8-bits over

the duration of the WR pulse (see ADC Conversion Cycle sec-

tion for details). The tON (WR) and settling time of the

ADG528A thus determines the width of the WR pulse.

Figure 31. Multichannel Inputs

OUTLINE DIMENSIONS

Dimensions shown in inches and (mm).

28-Lead Plastic DIP

(N-28)

28-Lead Plastic Leaded Chip Carrier

(P-28A)

–16–

REV. A

Share Link: