PRODUCT OVERVIEW
FEATURES
CPU
• SAM88 RC CPU core
Memory
• Program Memory (ROM)
- 64K × 8 bits program memory
(S3C828B/F828B)
- 32K × 8 bits program memory
(S3C8289/F8289)
- 16K × 8 bits program memory
(S3C8285/F8285)
- Internal flash memory (program memory)
√ Sector size: 128 bytes
√ 10 years data retention
√ Fast programming time:
+ chip erase: 50ms
+ sector erase: 10ms
+ byte program: 30µs
√ User programmable by 'LDC' instruction
√ Endurance: 10,000 erase/program cycles
√ Sector(128 bytes) erase available
√ Byte programmable
√ External serial programming support
√ Expandable OBPTM(on board program)
sector
• Data Memory (RAM)
- Including LCD display data memory
- 2614 × 8 bits data memory (S3C828B/F828B)
- 1078 × 8 bits data memory (S3C8289/F8289)
- 566 × 8 bits data memory (S3C8285/F8285)
Instruction Set
• 78 instructions
• Idle and stop instructions added for power-down
modes
65 I/O Pins
• I/O: 25 pins
• I/O: 40 pins(Sharing with LCD signal outputs)
Interrupts
• 8 interrupt levels and 18 interrupt sources
• Fast interrupt processing feature
8-Bit Basic Timer
• Watchdog timer function
• 4 kinds of clock source
S3C828B/F828B/C8289/F8289/C8285/F8285
8-Bit Timer/Counter A
• Programmable 8-bit internal timer
• External event counter function
• PWM and capture function
8-Bit Timer/Counter B
• Programmable 8-bit internal timer
• Carrier frequency generator
16-Bit Timer/Counter 0
• Programmable 16-bit internal timer
16-Bit Timer/Counter 1
• Programmable 16-bit internal timer
• External event counter function
• PWM and capture function
Watch Timer
• Interval time: 3.91mS, 0.25S, 0.5S, and 1S
at 32.768 kHz
• 0.5/1/2/4 kHz Selectable buzzer output
LCD Controller/Driver
• 32 segments and 8 common terminals
• 1/2, 1/3, 1/4, and 1/8 duty selectable
• Internal resistor circuit for LCD bias
Analog to Digital Converter
• 8-channel analog input
• 10-bit conversion resolution
• 25uS conversion time
UART
• Full-duplex serial I/O interface
• Four programmable operating modes
8-bit Serial I/O Interface
• 8-bit transmit/receive mode
• 8-bit receive mode
• LSB-first or MSB-first transmission selectable
• Internal or External clock source
1-2