PSD913G3-C-15JI Просмотр технического описания (PDF) - STMicroelectronics
Номер в каталоге
Компоненты Описание
производитель
PSD913G3-C-15JI Datasheet PDF : 91 Pages
| |||
PSD9XX Family
8.0
Register Bit
Definition
(cont.)
PSD935G2
VM Register
Bit 7
*
Bit 6
*
Bit 5
*
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
FL_data Boot_data FL_code Boot_code SR_code
Note: Upon reset, Bit1-Bit4 are loaded to configurations selected by the user in PSDsoft. Bit 0 is always cleared
by reset. Bit 0 to Bit 4 are active only when the device is configured in Philips 80C51XA mode. Not used
bit should be set to zero.
Bit definitions:
Bit 0 0 = PSEN can’t access SRAM in 80C51XA modes.
1 = PSEN can access SRAM in 80C51XA modes.
Bit 1 0 = PSEN can’t access Boot in 80C51XA modes.
1 = PSEN can access Boot in 80C51XA modes.
Bit 2 0 = PSEN can’t access main Flash in 80C51XA modes.
1 = PSEN can access main Flash in 80C51XA modes.
Bit 3 0 = RD can’t access Boot in 80C51XA modes.
1 = RD can access Boot in 80C51XA modes.
Bit 4 0 = RD can’t access main Flash in 80C51XA modes.
1 = RD can access main Flash in 80C51XA modes.
Memory_ID0 Register
Bit 7
Bit 6
S_size 3 S_size 2
Bit 5
S_size 1
Bit 4
S_size 0
Bit 3
F_size 3
Bit 2
F_size 2
Bit 1
Bit 0
F_size 1 F_size 0
Bit definitions:
F_size[3:0] = 4h, main Flash size is 2M bit.
F_size[3:0] = 5h, main Flash size is 8M bit.
S_size[3:0] = 0h, SRAM size is 0K bit.
S_size[3:0] = 1h, SRAM size is 16K bit.
S_size[3:0] = 3h, SRAM size is 64K bit.
Memory_ID1 Register
Bit 7
Bit 6
*
*
Bit 5
B_type 1
Bit 4
B_type 0
Bit 3
B_size 3
*Not used bit should be set to zero.
Bit definitions:
B_size[3:0] = 0h, Boot block size is 0K bit.
B_size[3:0] = 2h, Boot block size is 256K bit.
B_type[1:0] = 0h, Boot block is Flash memory.
Bit 2
B_size 2
Bit 1
B_size 1
Bit 0
B_size 0
14
Share Link: 