NXP Semiconductors
PCA9512A
Level shifting hot swappable I2C-bus and SMBus bus buffer
16. Revision history
Table 9. Revision history
Document ID
Release date
Data sheet status
Change notice Supersedes
PCA9512A_4
Modifications:
20090819
Product data sheet
-
PCA9512A_3
• Section 8.7 “Resistor pull-up value selection”, 2nd paragraph, 1st sentence changed from
“... always choose RPU ≤ 16 kΩ for VCC = 5.5 V maximum, RPU ≤ 24 kΩ for VCC = 3.6 V
maximum.” to “... always choose RPU ≤ 65.7 kΩ for VCC = 5.5 V maximum, RPU ≤ 45 kΩ for
VCC = 3.6 V maximum.”
• Figure 5 “Bus requirements for 3.3 V systems” updated:
– changed from “rise time > 300 ns” to “rise time = 300 ns”
– changed from “rise time < 20 ns” to “rise time = 20 ns”
• Figure 6 “Bus requirements for 5 V systems” updated:
– changed from “rise time > 300 ns” to “rise time = 300 ns”
– changed from “rise time < 20 ns” to “rise time = 20 ns”
PCA9512A_3
20090720
Product data sheet
-
PCA9512A_2
PCA9512A_2
20090528
Product data sheet
-
PCA9512A_1
PCA9512A_1
20051007
Product data sheet
-
-
PCA9512A_4
Product data sheet
Rev. 04 — 19 August 2009
© NXP B.V. 2009. All rights reserved.
21 of 23