NLSX3014
4-Bit 100 Mb/s Configurable
Dual-Supply Level
Translator
The NLSX3014 is a 4−bit configurable dual−supply bidirectional
level translator without a direction control pin. The I/O VCC− and I/O
VL−ports are designed to track two different power supply rails, VCC
and VL respectively. The VCC supply rail is configurable from 1.3 V
to 4.5 V while the VL supply rail is configurable from 0.9 V to (VCC
− 0.4) V. This allows lower voltage logic signals on the VL side to be
translated into higher voltage logic signals on the VCC side, and
vice−versa. Both I/O ports are auto−sensing; thus, no direction pin is
required.
The Output Enable (EN) input, when Low, disables both I/O ports
by putting them in 3−state. This significantly reduces the supply
currents from both VCC and VL. The EN signal is designed to track
VL.
Features
• Wide High−Side VCC Operating Range: 1.3 V to 4.5 V
Wide Low−Side VL Operating Range: 0.9 V to (VCC − 0.4) V
• High−Speed with 100 Mb/s Guaranteed Date Rate for VL > 1.6 V
• Low Bit−to−Bit Skew
• Overvoltage Tolerant Enable and I/O Pins
• Non−preferential Powerup Sequencing
• Small packaging: 1.7 mm x 2.0 mm UQFN12
• This is a Pb−Free Device
Typical Applications
• Mobile Phones, PDAs, Other Portable Devices
http://onsemi.com
MARKING
DIAGRAM
1
UQFN12
MU SUFFIX
CASE 523AE
UTMG
G
UT = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
LOGIC DIAGRAM
VL VCC GND
EN
I/O VL1
I/O VCC1
I/O VL2
I/O VL3
I/O VCC2
I/O VCC3
© Semiconductor Components Industries, LLC, 2008
July, 2008 − Rev. 4
I/O VL4
I/O VCC4
PIN ASSIGNMENT
EN
VL 1
12
11 VCC
I/O VL1 2
I/O VL2 3
I/O VL3 4
10 I/O VCC1
9 I/O VCC2
8 I/O VCC3
I/O VL4 5
6
7 I/O VCC4
GND
(TOP VIEW)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
1
Publication Order Number:
NLSX3014/D