¡ Semiconductor
MSM9225
(2) Output driver format setting: OCPOL, OCTN, OCTP
OCPOL is used to set the polarity of output.
OCTN is used to set the open/drain mode of the Nch transistor of the output driver.
OCTP is used to set the open/drain mode of the Pch transistor of the output driver.
The circuit configuration of the output driver and the relationship between bit content
and output driver format are as follows:
At reset, all bits are set to "0".
Output data
Synchronization
clock
Circuit configuration
Output control
circuit
VDD
Pch
Tx0
Nch
GND
VDD
Pch
Tx1
Nch
GND
21/73