¡ Semiconductor
ML7005
Adjusting the Analog Output Level
Adjust the analog output level according to the method shown in the figure 11.
RI/RH ≤ 1.6 is always required when VDD ≥ 4.5 V.
In the case of RI /RH > 1, if RI /RH = A, the maximum analog output load resistance is 20*A (kW).
If VDD is less than 4.5 V, RI/RH ≤ 1 is required.
DTGO (CPDGO)
RH
DTAI (CPAI)
–
+
Generator
RI
DTAO (CPAO)
OUT
Gain = RI
RH
Figure 11 Analog Output Level Adjustment
Concurrent Operation of 4 Functions
The DTMF signal generator, DTMF signal detector, call progress tone generator, and call
progress tone detector can operate concurrently.
When both the DTMF signal generator and call progress tone generator operate concurrently, the
DTMF signal sometimes cannot be detected if the receive level of the DTMF signal is less than
-36 dBm.
21/24