MCP2122 Просмотр технического описания (PDF) - Microchip Technology

Номер в каталоге

Компоненты Описание

производитель

MCP2122

Infrared Encoder/Decoder

Microchip Technology 

MCP2122

4.1 DC Characteristics

DC Characteristics

Standard Operating Conditions (unless otherwise specified)

Operating Temperature: –40°C ≤ TA ≤ +125°C (Extended)

Param.

No.

Sym

Characteristic

Min Typ (1) Max Units

Conditions

D001

D010

VDD Supply Voltage

IDD Supply Current (2)

1.8

—

5.5

V See Figure 4-1

—

0.1

1

mA FOSC = 1.8432 MHz, VDD = 5.5V

(TX = H, RXIR = H)

Transmitter (TX = L, RXIR = H)

—

—

300

µA FOSC = 1.8432 MHz, VDD = 1.8V (4)

—

—

1

mA FOSC = 1.8432 MHz, VDD = 5.5V

Receiver (RXIR = L, TX = H)

—

—

500

µA FOSC = 1.8432 MHz, VDD = 1.8V (4)

D020

IPD Device Disabled

Current (3)

—

—

—

—

—

—

2

mA FOSC = 1.8432 MHz, VDD = 5.5V

2

µA VDD = 1.8V (4)

4

µA VDD = 5.5V

Note 1: Data in the Typical (“Typ”) column is based on characterization results at +25°C. This data is for design

guidance only and is not tested.

2: The supply current is mainly a function of the operating voltage and frequency. Pin loading, pin rate and

temperature have an impact on the current consumption.

a)The test conditions for all IDD measurements are:

16XCLK = external square wave, from rail-to-rail; TX = VSS, RXIR = VSS, RESET = VDD.

3: The device disable current is mainly a function of the operating voltage. Temperature also has an impact

on the current consumption. When the device is disabled (RESET = VSS). The test conditions for all IDD

measurements are:

16XCLK = external square wave, from rail-to-rail; TX = VSS, RXIR = VDD, RESET = VSS; The output pins

are driving a high or low level into infinite impedance.

4: These parameters (shaded) are characterized but are not tested. These values should be used for design

guidance only.

© 2007 Microchip Technology Inc.

Preliminary

DS21894C-page 17

Share Link: