MC10H644, MC100H644
Table 6. AC CHARACTERISTICS (VT = VE = 5.0 V ±5%)
0°C
25°C
85°C
Symbol
Characteristic
tPLH
Propagation Delay ECL
D to Output
All Outputs
Condition
CL = 50 pF
Min Max Min Max Min Max Unit
5.8 6.8 5.7 6.7 6.1 7.1 ns
tPLH
Propagation Delay TTL
D to Output
CL = 50 pF
5.7 6.7 5.7 6.7 6.0 7.0 ns
tskwd*
tskwd*
tskwd*
tskp−p*
tPD
Within−Device Skew
Within−Device Skew
Within−Device Skew
Part−to−Part Skew
Propagation Delay
R to Output
Q0, 1, 4, 5
Q2, Q3
All Outputs
Q0, 1, 4, 5
All Outputs
CL = 50 pF
CL = 50 pF
CL = 50 pF
CL = 50 pF
CL = 50 pF
− 0.5 − 0.5 − 0.5 ns
− 0.5 − 0.5 − 0.5 ns
− 1.5 − 1.5 − 1.5 ns
− 1.0 − 1.0 − 1.0 ns
4.3 7.3 4.3 7.3 4.5 7.5 ns
tR
Output Rise/Fall Time
tF
0.8 V − 2.0 V
fmax
Maximum Input Frequency
TW
Minimum Pulse Width Reset
All Outputs
CL = 50 pF
CL = 50 pF
− 1.6 − 1.6 − 1.6 ns
135 − 135 − 135 − MHz
1.5 − 1.5 − 1.5 − ns
trr
Reset Recovery Time
TPW
Pulse Width Out High or Low @ fin Q0, 1
= 100 MHz and CL = 50 pF
CL = 50 pF
Relative 1.5 V
1.25 − 1.25 − 1.25 − ns
9.5 10.5 9.5 10.5 9.5 10.5 ns
TS
Setup Time
SEL to DE, DT
ns
2.0 − 2.0 − 2.0 −
TH
Hold Time
SEL to DE, DT
ns
2.0 − 2.0 − 2.0 −
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
http://onsemi.com
4