MAPDCC0004 Просмотр технического описания (PDF) - M/A-COM Technology Solutions, Inc.

Номер в каталоге

Компоненты Описание

производитель

MAPDCC0004

Low Cost Two-Way SMT Power Divider, 1700 - 1900 MHz

M/A-COM Technology Solutions, Inc. 

MAPDCC0004

Low Cost Two-Way SMT Power

Divider, 1700 - 1900 MHz

Electrical Specifications1: TA = 25°C

Parameter

Insertion Loss

Isolation

VSWR

Amplitude Balance

Phase Balance

Test Conditions

Above 3.0 dB

—

—

—

—

Frequency

1700 - 1900

1700 - 1900

1700 - 1900

1700 - 1900

1700 - 1900

1. All specifications apply with a 50-ohm source and load impedance.

Rev. V3

Units

dB

dB

Ratio

dB

Deg

Min

—

15

—

—

—

Typ

0.3

20

1.3:1

0.1

2

Max

0.5

—

1.5:1

0.15

4

Absolute Maximum Ratings 2,3

Parameter

Input Power 4

Operating Temperature

Storage Temperature

Absolute Maximum

1W CW

-40°C to +85°C

-65°C to +150°C

2. Exceeding any one or combination of these limits may cause

permanent damage to this device.

3. M/A-COM does not recommend sustained operation near

these survivability limits.

4. With internal load dissipation of 0.125W maximum

Recommended PCB Configuration

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

GMIC Circuits are sensitive to electrostatic

discharge (ESD) and can be damaged by static

electricity. Proper ESD control techniques should

be used when handling these devices.

2

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Share Link: