LQFP100 Просмотр технического описания (PDF) - NXP Semiconductors.
Номер в каталоге
Компоненты Описание
производитель
LQFP100 Datasheet PDF : 69 Pages
| |||
NXP Semiconductors
LPC2364/65/66/67/68
Single-chip 16-bit/32-bit microcontrollers
Table 4. Pin description …continued
Symbol
Pin
Ball
Type
P1[0]/
ENET_TXD0
95[1]
D5[1]
I/O
O
P1[1]/
ENET_TXD1
94[1]
B4[1]
I/O
O
P1[4]/
93[1]
A4[1]
I/O
ENET_TX_EN
O
P1[8]/
ENET_CRS
92[1]
C5[1]
I/O
I
P1[9]/
ENET_RXD0
91[1]
B5[1]
I/O
I
P1[10]/
ENET_RXD1
90[1]
A5[1]
I/O
I
P1[14]/
89[1]
D6[1]
I/O
ENET_RX_ER
I
P1[15]/
88[1]
C6[1]
I/O
ENET_REF_CLK
I
P1[16]/
ENET_MDC
87[1]
A6[1]
I/O
O
P1[17]/
ENET_MDIO
86[1]
B6[1]
I/O
I/O
P1[18]/
32[1]
H4[1]
I/O
USB_UP_LED/
O
PWM1[1]/
CAP1[0]
O
I
P1[19]/CAP1[1] 33[1]
J4[1]
I/O
I
P1[20]/PWM1[2]/ 34[1]
K4[1]
I/O
SCK0
O
I/O
P1[21]/PWM1[3]/ 35[1]
F5[1]
I/O
SSEL0
O
I/O
P1[22]/MAT1[0] 36[1]
J5[1]
I/O
O
Description
P1[0] — General purpose digital input/output pin.
ENET_TXD0 — Ethernet transmit data 0.
P1[1] — General purpose digital input/output pin.
ENET_TXD1 — Ethernet transmit data 1.
P1[4] — General purpose digital input/output pin.
ENET_TX_EN — Ethernet transmit data enable.
P1[8] — General purpose digital input/output pin.
ENET_CRS — Ethernet carrier sense.
P1[9] — General purpose digital input/output pin.
ENET_RXD0 — Ethernet receive data.
P1[10] — General purpose digital input/output pin.
ENET_RXD1 — Ethernet receive data.
P1[14] — General purpose digital input/output pin.
ENET_RX_ER — Ethernet receive error.
P1[15] — General purpose digital input/output pin.
ENET_REF_CLK — Ethernet reference clock.
P1[16] — General purpose digital input/output pin.
ENET_MDC — Ethernet MIIM clock.
P1[17] — General purpose digital input/output pin.
ENET_MDIO — Ethernet MIIM data input and output.
P1[18] — General purpose digital input/output pin.
USB_UP_LED — USB GoodLink LED indicator. It is LOW when device is
configured (non-control endpoints enabled), or when host is enabled and
has detected a device on the bus. It is HIGH when the device is not
configured, or when host is enabled and has not detected a device on the
bus, or during global suspend. It transitions between LOW and HIGH
(flashes) when host is enabled and detects activity on the bus.
(LPC2364/66/68 only)
PWM1[1] — Pulse Width Modulator 1, channel 1 output.
CAP1[0] — Capture input for Timer 1, channel 0.
P1[19] — General purpose digital input/output pin.
CAP1[1] — Capture input for Timer 1, channel 1.
P1[20] — General purpose digital input/output pin.
PWM1[2] — Pulse Width Modulator 1, channel 2 output.
SCK0 — Serial clock for SSP0.
P1[21] — General purpose digital input/output pin.
PWM1[3] — Pulse Width Modulator 1, channel 3 output.
SSEL0 — Slave Select for SSP0.
P1[22] — General purpose digital input/output pin.
MAT1[0] — Match output for Timer 1, channel 0.
LPC2364_65_66_67_68
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7.1 — 16 October 2013
© NXP B.V. 2013. All rights reserved.
13 of 69
Share Link: 