Philips Semiconductors
Stereo filter and codec
Preliminary specification
SAA2003
FEATURES
• Single-chip stereo filter and codec
• Wide operating voltage range: 2.7 to 5.5 V
• Low-power consumption: 98 mW; 3.0 V
• Sleep mode for low power and low Electromagnetic
Interference (EMI)
• Transparent serial audio data mode in sleep
• IEC 958 digital output
• Peak level detector for start of track detection or
VU meter
• Versatile fade processor; slow/fast fade, mute,
12 dB attenuation
• Serial audio interface for I2S or EIAJ formats
• Error concealment
• Three-wire L3 bus microcontroller interface
• Three sample rates:
– 32 kHz
– 44.1 kHz
– 48 kHz
• Internal or external clock source
• Three programmable outputs
• Small surface mounted package (SOT307).
GENERAL DESCRIPTION
The SAA2003 performs the sub-band filtering and audio
frame codec functions in the Precision Adaptive Sub-band
Coding (PASC) system. It can be used as a stand-alone
decoder for playback only applications, but requires the
addition of an Adaptive Allocation and Scale Factor
processor (SAA2013) in order to perform PASC encoding
in a DCC record system.
ORDERING INFORMATION
EXTENDED TYPE
NUMBER
SAA2003H
PINS
44
PIN POSITION
QFP(1)
PACKAGE
MATERIAL
plastic
CODE
SOT307
Note
1. When using reflow soldering it is recommended that the Dry Packing instructions in the “Quality Reference
Pocketbook” are followed. The pocketbook can be ordered using the code 9398 510 34011.
May 1994
2