IC9 Просмотр технического описания (PDF) - HIROSE ELECTRIC
Номер в каталоге
Компоненты Описание
производитель
IC9 Datasheet PDF : 4 Pages
| |||
Card Bus Socket Connectors
IC9 Series
sFeatures
1. Compliant with PC Card Standards
Complies with latest requirements of PC Card
Standard.
2. Repairable
Repairable terminations of connector solder
joints after installation on the board.
3. Lead Offset
Available with two board mounting levels of
terminations, to allow use of different height
components.
sProduct Specifications
Current rating 0.5 A
Operating temperature -55ç to +85ç (Note 1)
Storage temperature -10ç to +60ç (Note 2)
Ratings
Voltage rating 125 V AC Operating humidity 95% R.H. or less (No condensation) Storage humidity
40 to 70% (Note 2)
Item
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
4. Vibration
Specification
1000M ohms min.
No flashover or insulation breakdown.
40 m ohms max. (initial value)
No electrical discontinuity of 100ns or
more
500 V DC
500 V AC / 1 minute
1 mA
Conditions
Frequency: 10 to 2000 Hz, single amplitude of 0.75 mm or
acceleration of 147 m/s2(peak), 4 hours in each of the 3 directions.
5. Humidity (Steady state) Insulation resistance: 100 M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature cycle
No damage, cracks, or parts looseness.
-55ç, 30 min/15 to 30ç, within 5 min/85ç30 min
/15 to 35ç, within 5 min, for 5 cycles
7. Durability
(Insertion/withdrawal)
8. Resistance to
soldering heat
Change of contact resistance from the
start should be 20 m ohms max.
No deformation of components
affecting performance.
10000 cycles at 400 to 600 cycles per hour
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during
transportation.
sMaterials
Part
Insulator
Contact
Ground plate
Material
PA
Phosphor bronze
Brass
Finish
Black
Contact Area : gold plating
Lead Area : solder plating
Contact Area : gold plating
Lead Area : solder plating
Notes
UL94V-0
-----------------
-----------------
A48
Share Link: 