HCPL-3180-500 Просмотр технического описания (PDF) - HP => Agilent Technologies

Номер в каталоге

Компоненты Описание

производитель

HCPL-3180-500

2 Amp Output Current, High Speed IGBT/MOSFET Gate Drive Optocoupler

HP => Agilent Technologies 

Agilent HCPL-3180 2 Amp Output

Current, High Speed IGBT/MOSFET Gate

Drive Optocoupler

Data Sheet

Description

This family of devices consists of

a GaAsP LED. The LED is

optically coupled to an

integrated circuit with a power

stage. These optocouplers are

ideally suited for high frequency

driving of power IGBT and

MOSFETs used in Plasma

Display Panels, high

performance DC/DC convertors

and motor control invertor

applications.

Ordering Information

Specify part number followed by

option number (if desired):

Example : HCPL-3180-XXX

N/C 1

ANODE 2

CATHODE 3

N/C 4

8 VCC

7 VO

6 VO

5 VEE

Functional Diagram

No option = Standard DIP

package, 50 per tube.

300 = Gull Wing Surface Mount

Option, 50 per tube.

500 = Tape and Reel Packaging

Option.

060 = DIN EN 60747-5-2 Option,

VIORM=630 Vpeak (pending

approval)

Features

• 2 A minimum peak output current

• 250 KHz maximum switching

speed

• High speed response: 200 ns max

Propagation delay over

temperature range

• 10 KV/us minimum common mode

rejection (CMR) at VCM=1500 V

• Under voltage lockout protection

(UVLO) with hysteresis

• Wide operating temperature

range: -40 °C to +100 °C

• Wide VCC operating range:

10 V to 20 V

• 20 ns typ pulse width distortion

• Safety Approvals:

UL approval pending

3750 VRMS for 1 minute.

CSA approval

DIN EN 60747-5-2 approval

pending

Applications

• Plasma Display Panel (PDP)

• Distributed power architecture

(DPA)

• Switch mode rectifier (SMR)

• High performance DC/DC

convertor

• High performance switch mode

power supply (SMPS)

• High performance uninterruptible

power supply (UPS)

• Isolated IGBT/Power MOSFET

gate drive

A 0.1 uF bypass capacitor must be connected between pins 5 and 8.

CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/

or degradation which may be induced by ESD.

Share Link: