FMM5057X Просмотр технического описания (PDF) - Eudyna Devices Inc

Номер в каталоге

Компоненты Описание

производитель

FMM5057X

C-Band Power Amplifier MMIC

Eudyna Devices Inc 

FMM5057X

C-Band Power Amplifier MMIC

■DIE ATTACH

1) The die-attach station must have accurate temperature control and an inert forming gas should

be used.

2) Chips should be kept at room temperature except during die-attach.

3) Place package or carrier on the heated stage.

4) Lightly grasp the chip edges by the longer side using tweezers.

Die attach conditions

Stage Temperature : 300 to 310 deg.C

Time : less than 15 seconds

AuSn Preform Volume : per next Figure

2500

FMM5057X

2000

1500

1000

500

0

0

2

4

6

8

10

12

14

16

18

20

Area of Chip Bach Surface (mm^2)

■ WIRE BONDING

The bonding equipment must be properly grounded. The following or equivalent equipment, tools,

materials, and conditions are recommended.

1) Bonding Equipment and Bonding Tool.

Bonding Equipment : West Bond Model 7400 (Manual Bonder)

Bonding Tool : CCOD-1/16-S-437-60-F-2010-MP (Deweyl)

2) Bonding Wire

Material : Hard or Half hard gold

Diameter : 0.7 to 1.0 mil

3) Bonding Conditions

Method : Thermal Compression Bonding with Ultrasonic Power

Tool Force : 0.196 N ± 0.0196 N

Stage Temperature : 215 deg.C ± 5 deg.C

Tool Heater : None

Ultrasonic Power Transmitter : West Bond Model 1400

Duration : 150 mS/Bond

13

Share Link: